This will detect all of the sensors present and they will be used for fancontrol. Check the official lm-sensors devices table to see if experimental drivers are available for such motherboards. Support for newer motherboards may not yet be in the Linux kernel.
Fancontrol (lm-sensors) - Script (written in Bash) to configure fan speeds.There are multiple working solutions for fan control for both desktops and notebooks. Here is some more information about this topic. In some cases, you will not be able to use the Fancontrol script due to incompatible cooling architecture (e.g. Some laptops have two fans for CPU and GPU, but the first fan cools down CPU and GPU at the same time, while the other one cools CPU only. Some laptops have single fan for both CPU and GPU and cools both at the same time. Note: Laptop users should be aware about how cooling system works in their hardware. 9.2.2 Alternative solution: absolute paths.9.2 Device paths have changed in /etc/fancontrol.9.1 Increase the fan divisor for sensors.7.5 Fan control modes on certain TUF series laptops.7.3 Alternative method using EC registers.7.2 Generate configuration file with pwmconfig.2.4 Fancontrol stops working after suspend–wake cycles.You can use them to run at full speed from an external supply if you adapt the plug. An integrated circuit varies the speed and airflow of a fan using a pulse-width-modulated (PWM) voltage in response to temperature or system commands send typically by a computer motherboard. NOTE: PWM Fans are not variable speed control fans on their own. Protection: Current Limit/ Impedance/Polarity Protection.Rated Current: 0.01A - 0.35A Ramping Startup.
Connector: 4-Pin 2510 MOLEX (Female Housing/Male Pin).Wire Option: 4 Wire Lead-Tachometer(White), PWM(Blue), Length- 457.2mm(18in).Coolerguys 120mm (120x120x25mm) 12 VDC PWM Variable Speed Fan CG12025H12B2-PWM
0 kommentar(er)
